Guarantee conditions for ANLI Decoracryl products
The manufacturer provides a one-year guarantee for Anli Decoracryl for the Classic, Luxe, Light and Stone collections and a two-year guarantee for the DeLuxe collection. During the guarantee period the manufacturer will carry out exchange or repair of the Decoracryl material in connection with the finding of significant defects in the material. The guarantee does not apply to products made of Decoracryl in the event of incorrect use and disregard of maintenance requirements for products made of Decoracryl that are recommended by the manufacturer.
The “Instructions for use and maintenance requirements for products made of ANLI Decoracryl” constitute an integral enclosure with the products.
Instructions for use and maintenance requirements for products made of ANLI Decoracryl (manufacturer’s recommendation) – these instructions apply to all Collections.
Composition:
PETG (polyethylene terephthalate-glycol):
DeLuxe Collection: the material is made by sintering two or more plastics, has a surface structure and one or both sides have a glossy finish.
Composition:
PMMA (polymethyl methacrylate)
Classic Collection: cast material, glossy surface on face and matte surface on underside, or glossy on both sides.
Luxe Collection: cast material with satin finish on both sides.
Light Collection: cast material, mainly colored and once side processed.
Collection Stone: natural stone set in acrylic.
Packing: the sheet is protected on both sides by sheeting.
Transportation: loading and unloading of sheets to be carried out manually and in a vertical position. In the event of long-distance transport, the material must be packed in a cardboard box with solid wooden framing.
Anli Decoracryl with plant filling fades under ultraviolet (same as daylight) rays. For this reason it is not recommended to expose Decoracryl with plant filling to direct sunlight or to use it in locations where there is indirect UV radiation. (For example, reflections in mirrors or light rays coming in through window openings).
Anli Decoracryl
Anli Decoracryl may be used in the proximity of light sources that do not emit heat, and for other bulbs the safe distance is a minimum of 15 cm.
Anli Decoracryl cannot be installed in proximity (distances less than 30 cm) to open flame. In the event that Decoracryl is used as a work surface or wall covering in a kitchen, use of a protective coating or layer is recommended – glass or sheeting. The protective layer (its properties and technical data) must be approved in advance by the manufacturer or a representative thereof.
Anli Decoracryl cannot be placed close to heat sources (radiators, stoves, fireplaces and other heating elements).
The softening temperature for Decoracryl is within the range of 80 to 105°C, which is why the maximum temperature for its use is from 10°C to 50°C.
Anli Decoracryl warps with drops in temperature that exceed 20°C during a day. That is why the temperature cannot drop by more than 20°C in rooms where Decoracryl is installed.
Moisture: The facing of Decoracryl with natural fillings must be sealed against moisture, which means carefully sealed with silicone, smoothed and covered with framing or joins must be glued.
Burning candles, lit cigarettes, or any other burning materials should not be used near Decoracryl products.
Do not allow Anli Decoracryl products to come into contact with hot objects or boiling water.
Products made of Anli Decoracryl cannot be exposed to the effects of aggressive chemicals such as solvents, acetone, metal cleaners, compounds containing methylene chloride, acids, chlorine hydrocarbon derivatives, ketones, ethers, acid-based solutions etc. If any of these materials come into contact with the Decoracryl surface, it is necessary to immediately wash the surface with a large amount of soapy water.
Products made of Decoracryl cannot be exposed to strong impact with heavy or sharp objects or swift blows. If Decoracryl is used as a work surface, it is recommended that a protective layer is used – glass or protective sheeting.
When installing Anli Decoracryl, the material cannot be overly tightened using fixing screws or bolts (the material may crack under extreme pressure). It is recommended to use rubber or plastic washers beneath the screw or bolt head.
Re-enforced hardware for hanging or wall-mounted panels must be selected with regard to the wall material to which they will be attached.
For transporting Anli Decoracryl you must use foam padding to prevent mechanical scratching or breaking. The panel corners are vulnerable, and must be protected against breakage during loading, unloading, transportation and installation.
Anli Decoracryl must be stored on a clean, flat surface. In the event of heat or other dynamic effects the material might warp as a result of incorrect storage, conforming to the uneven surface it is in contact with.
In the event of using Anli Decoracryl as partitions, these must not be leaned on with elbows, or hung from, nor may heavy objects be attached to them.
In the event of installation of a lamp onto a product made from Anli Decoracryl, it is necessary to carefully follow the use instructions for the lamp, which are included with the lamp. Do not leave lights on unattended. Lights must be turned off when leaving the room.
When cleaning Anli Decoracryl, do not use abrasive cleaners with abrasive or corrosive properties, or sponges with steel wool or granular material on their surface. An effective shine can be achieved after cleaning by polishing with a soft, dry cloth using a back and forth motion. In addition to the general cleaning methods, it is recommended to use primarily soft fabrics or a chamois that has been wetted and wrung thoroughly beforehand. After cleaning it is necessary to always carefully dry the wet spots by wiping with a soft dry cloth. A good alternative is systematic dry cleaning using a vacuum cleaner equipped with a “soft brush”.
Dust can be removed from the surface of Anli Decoracryl using a clean, dry and soft fabric (flannel, canvas, plush, etc…). It is recommended that any part of the Decoracryl that becomes soiled be cleaned as soon as possible. If the dirtied areas are left dirty for longer periods of time, the risk of stains, defects and damage increases dramatically.
CAUTION! These instructions must be followed. In the event of non-compliance with the above instructions and manufacturer recommendations, the company cannot be held responsible for the guarantee terms on Decoracryl Anli products.
